Storage
24
Cleaning
− Use a soft cloth or brush to clean the housing.
− Clean the LED light
18
with a soft, dry brush.
− Clean the vents and area around the saw blade holder
11
.
− Remove dust or chips by blowing them out with compressed air.
− Remove any stubborn dirt with a damp cloth and a mild cleaner if necessary.
Checking and maintaining the product
− Check the condition of the product regularly. Among other things, check to make
sure:
• that the switch
2
/
3
/
6
, sliding shoe
8
and guide roller
10
are not
damaged,
• that the accessories are in proper condition,
• the vents are unobstructed and clean. If applicable, use a soft brush to clean
them.
−
If you identify any damage, you must have it repaired by a specialist
workshop to avoid potential danger.
− Perform product maintenance regularly to ensure that the product is in proper
condition. For this, keep the outside of the saw clean so that all moving parts can be
moved smoothly and without any unnecessary wear. Lubricate the guide roller
10
regularly.
Storage
1. Clean the product thoroughly prior to storage (see chapter ‘Cleaning and
maintenance’).
2. If possible, store the clean product and accessories in the original packaging, at a
storage temperature ranging between 5°C and 20°C (room temperature), and in a
place which is not accessible for children nor exposed to heat.
Transport
− If possible, use the original packaging for transport.
− Before transport, remove the saw blade
15
and store it safely.
Replacing the carbon brushes
− If excessive sparking occurs, have the carbon brushes checked by a qualified
electrician.
− The carbon brushes may only be replaced by a specialist workshop or by
qualified specialists.