Preparation
16
Adjusting the saw shoe for mitre cuts
CAUTION!
Risk of injury!
Improper handling of the product can lead to severe injury.
− Never saw with a saw shoe which hasn’t been secured.
− Before sawing, always make sure that the saw blade’s locking lever is
pushed firmly back.
− Do not saw any curves in mitre cuts.
NOTICE!
Risk of damage!
Improper handling of the product can damage the product.
− The protective cover must be opened upwards for mitre cuts.
1. Release the locking lever for the saw shoe
14
by pushing it towards the saw
blade
15
to the position
(see
Fig. B
).
2. Slide the shoe slightly backwards.
The saw shoe can now be tilted up to 45° to the left or right (see
Fig. K
).
3. Slide the shoe slightly forward in order to lock it again.
4. Attach the locking lever for the saw shoe by pushing it to the position .
If the saw shoe is pushed backwards, it only works in the locking positions at 0°, 15°,
30° and 45°, which are marked on the saw shoe scale (see
Fig. E
).
Put the saw shoe in the appropriate position and tighten the locking lever by
pushing it backwards to the position .
For right- or left-angled mitre cuts, the protective cover
13
must be lifted upward
towards the front and the adapter for the shaving/chip extraction system
17
must be removed.