FERREX FAPS 20-I Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 30

FERREX FAPS 20-I Скачать руководство пользователя страница 19

Operation

19

Charging the rechargeable battery

− To charge the battery, follow the instructions described in the user manual for the

battery pack and charger used.

Inserting and removing the rechargeable battery

− To insert the rechargeable battery, slide it into the battery holder

5

. The

rechargeable battery will audibly lock into place (see

Fig. A

).

− To remove the rechargeable battery, press the battery release button on the

rechargeable battery and remove it from the battery holder.

Operation

NOTICE!

Risk of damage!

Improper handling of the product, saw blade and workpiece can damage the

product.

− Clean the product (housing, vents and moving parts) regularly to remove

dust and chips/shavings.

− Use a saw blade that suits the respective workpiece (wood, metal or

plastic).

− When cutting metal, use oil as a coolant and lubricant.

− Use a little pressure to push the saw slightly forward in order to avoid

overheating and destroying the saw blade.

− When sawing, press the saw shoe firmly against the workpiece.

− Place thin workpieces on an additional plate to dampen vibrations and

improve the cutting result.

− Perform plunge cuts to process soft work pieces only.

− Secure the work piece to prevent it from moving while processing.

Setting the stroke rate

You can continuously adjust the stroke rate for the saw blade depending on the work

piece material.

− Move the dial for the stroke rate control

1

to the desired stroke rate.

«
...
17
18
19
20
21
...
»

Содержание FAPS 20-I































Отзывы:

Нет отзывов