Ferrari California, Руководство по ремонту

Страница: 1536 / 1727

Stop&Start system activated from button on roof panel (LED on);
driver seat belt buckled.
The TFT display notifies the driver when the Stop&Start system has stopped the engine by displaying the
message "Stop&Start active" , together with the specific symbol.
This message is displayed continuously for as long as the vehicle is in the stop state.
To cancel the message and reduce the symbol to icon form, press the MODE button ("ESCAPE" function).
For reasons of safety, to maintain comfort levels and to ensure that the vehicle and its individual systems
function correctly, automatic engine cut-out is inhibited in the following cases:
The system also constantly monitors a number of vehicle parameters (battery state of charge, engine coolant
temperature, catalytic converter temperature, clutch oil temperature, brake servo vacuum level, climate
comfort in passenger compartment) and will inhibit automatic engine cut-out if necessary to maintain
safety, vehicle functionality and on-board climate comfort.
accelerator pedal depressed;
when the system recognises a potentially hazardous situation (vehicle on a gradient, vehicle stationary
with wheels steered - e.g. while vehicle is about to turn into a junction or a roundabout);
when the system recognises that the vehicle is in a traffic queue or parking (by monitoring reverse gear
state, time elapsed since last stop and vehicle speed);
with maximum AC system output requested ("low", "max defrost" or "defrost rear screen");
with very low or very high external temperatures;
gearbox in "N";
DCT gearbox Park Lock function released manually;
in the event of a malfunction compromising the functionality of the system itself.
With the Stop&Start system active and the vehicle in stop state, performing any of the following actions will
restart the engine:
releasing the brake pedal;
pulling the UP shift paddle;
engaging reverse;
pressing the accelerator pedal.
For reasons of safety, to maintain comfort while the vehicle is stationary and to ensure that the entire vehicle
and its systems function correctly, the Stop&Start will automatically restart the engine in any of the
following cases:
ENGINE START button on steering wheel pressed;