Ferrari California, Руководство по ремонту, Страница: 152 / 1727

B1.03 Tightening torques
Fastening belt tensioner to crankcase Screw 25 Nm B
Fastening ancillary belt pulley to front cover Screw 49 Nm B
Fastening idler pulley to front cover Screw 25 Nm B
Cap - front cover M20x11 tapered plug 22 Nm B
Cap - front cover M14x1.5x13 tapered
plug
23 Nm B
Cap - front cover M14x1.5x13 tapered
plug
23 Nm B
Fastening spark plug NGK spark plug 11 Nm A
Fastening engine mounting bush to front
removable subframe
Screw 50 Nm B
Fastening engine strut to engine bushing Screw 103 Nm A
Nut 103 Nm A
Fastening ground braid to engine Screw 25 Nm B
Fastening heat shield to transmission shaft Screw 8 Nm C
Fastening passenger compartment air intake tray Nut / Screw 7.5 Nm B
Fastening water pipe to pressure
switch/thermostat and water pump
Screw collar 4 Nm B
Fastening lower crankcase shell to crankcase
Products to use: SHELL Helix Ultra SAE 5W-40 Nut (pretightening) 10 Nm A
Nut (applying angle of
145°± 1°)
61.5 Nm
+15
-15
0
Nut (applying angle of
115°± 1°)
57 Nm
+19.5
-19.5
0
Screw 10 Nm B
Fastening lower crankcase shell to crankcase
Products to use: MOLYKOTE 1000
Set angle of: 105° ± 1° External nut
pretightening
15 Nm A
Tightening torque of
external nut at 105°±
1°
37.5 ÷ 76.5 Nm A
Fastening outer seam of lower crankcase shell to
crankcase
Screw 10 Nm A
Fastening piston cooling jets
Products to use: Loctite 242 Screw 3 Nm B
Fastening threaded plug of flywheel side oil duct
to crankcase
M22x1.5 plug 60 Nm A
Oil and water duct threaded plugs M22x1.5 plug in brass 30 Nm B
Fastening oil sump to lower crankcase shell Screw 10 Nm B
Fastening heat exchanger to crankcase Screw 10 Nm B
Fastening front cover to crankcase and cylinder
heads
Screws 10 Nm B
Fastening threaded plug to front cover M18x1.5 plug 40 Nm B
Fastening water vent pipe from heat exchanger to
expansion tank to heat exchanger
Nut 10 Nm B
Fastening mounting bracket for water pipe from
heat exchanger to expansion tank
Screw 10 Nm B
Fastening oil vapour separator to left hand Screw 10 Nm B
Tightening torque Nm Class