![background image](http://html.mh-extra.com/html/ferrari/af-series/af-series_warnings-and-instructions-for-use_554675096.webp)
96 of 120
MVA 02 rev 5 - December 2017
10.3.2 Assembling and dismantling drive belts
1.- After checking correct pulley alignment, fit the
belts. Tools should not be used to force the belts
into place on the pulleys (Photos 41, 42 and 43). If
necessary, reduce the distance between pulley
centres by moving the motor closer.
Photo 41
Photo 42
Photo 43
2.- Check belt tension. For this operation, see
paragraph 8.4 of this manual.
3.- If the tension of belts is insufficient, the motor
must be moved to tension them correctly.