MVA 02 rev 5 - December 2017
93 of 120
6.- Fit the assembled bush, grubscrews and pulley
onto the motor shaft with the spline inserted in the
corresponding slot in the bush hole. If necessary,
widen the bush hole by inserting a suitable tool into
the bush slit (Photos 35 and 36).
Photo 35
Photo 36
7.- Always check that there is a minimum of
clearance
between
the
spline
and
the
corresponding slot (Photo 37).
Photo 37
8.- Repeat operations 2 to 7 to fit the pulley onto
the transmission shaft.
Clearance
