106 of 120
MVA 02 rev 5 - December 2017
5.- Fix the spring locking ring into the recess in the
support from the transmission side (Photo 64)
Photo 64
6.- Partially insert the shaft, complete with all
components fitted, into the support. The shaft must
be fitted from the impeller side, first inserting the
end of the shaft with the internal ring of the roller
bearing and the grease sealing ring (Photo 65).
Photo 65
7.- Before completely inserting the shaft, rest it in
an intermediate position and fix the suspended
spring locking ring in the recess on the impeller side
of the support (Photo 66).
Photo 66