background image

FERNO/MAN/1121/226-R3/UK

4

1 - SAFETY INFORMATION

1.1 - Warnings

Warning notices indicate a potentially hazardous situation which, 
if not avoided, could result in injury or death.

 

WARNING

Improper use of the trolley can cause injury. Use the 

trolley only for the purpose described in this manual.
Untrained operators can cause injury or be injured. Permit 

only trained personnel to operate the trolley.
Improper operation can cause injury. Operate the trolley 

only as described in this manual.
An unattended patient can be injured. Stay with the 

patient at all times.
An unrestrained patient can fall off the trolley and be 

injured. Use all harness straps to secure the patient on the 

trolley.
Helpers can cause injury or be injured. Maintain control of 

the trolley, operate the controls, and direct all helpers.
Improper maintenance can cause injury. Maintain the 

trolley only as described in this manual.
Improper parts and service can cause injury. Use only 

Ferno parts and Ferno-approved service on the trolley.
Modifying the trolley can cause injury and damage.  

Use the trolley only as designed by Ferno.
Attaching improper items to the trolley can cause injury. 

Use only Ferno-approved items on the trolley.

Bleach, phenols and iodine can cause damage.  Do not apply 

products containing these chemicals to the Trolley.
Improper lubricants can cause damage. Please refer to 

service manual for instructions.
Trapping hazards are unavoidable in any design of Trolley 

due to its folding action. Operate with care.

Safety Information

 

WARNING

Do NOT exceed the safe working load of the trolley

 

DANGER

Electric shock can cause death or serious injury. 

INSTALL/USE/OPERATE/MAINTAIN the trolley only 

as described in this manual.

1.2 - Dangers

Danger notices indicate an immediate hazardous situation which, 
if not avoided, will result in injury or death.

1.5 - Trolley and Lock Compatibility

Combining different manufacturers’ products into a “mixed-
component”  trolley/fastener system can increase the user’s risk 
of injury and damage if not checked first for compatibility.
However, Ferno trolleys are designed to be compatible with 
either the Ferno range of Two-Part locking devices or competitors 
equivalent locking devices, giving full compatibility and 
interchangeability across your vehicle fleet.

 

WARNING

To comply with EN 1789, the patient harness and leg 

strap(s) MUST be used at all times to hold the patient 

on the trolley and the trolley MUST be secured in the 

vehicle with the 2-part locking device.

1.3 - Important Notices 

Important notices emphasise important usage or maintenance 
information. Failure to follow Important notices could result in 
damage to the product or property damage. Example:.

1.4 - Cautions

 

WARNING

Blood-borne Disease Notice

To reduce the risk of exposure to blood borne diseases such 

as HIV-1 and hepatitis when using the trolley, follow the 

disinfecting and cleaning instructions in this manual.

Содержание CCT-PX









































Отзывы: