Ferno CCT-PX, Руководство пользователя

Страница: 31 / 40

FERNO/MAN/1121/226-R3/UK
31
Attaching fixing tang to ACR blue fixing strap
7.9 - Attachment of other 3rd party
child harness - Optional fixing kit
Please refer to ACR user manual for the procedure for attaching
and using ACR harness system.
POWERX and CCT-PX were not designed or tested for the
attachment of third party harnesses. However there is available
from Ferno a set of 4 fixing tangs to facilitate attachment of other
child harnesses, such as the ACR harness, where the upper fixing
straps do not wrap around and attach to each around the back
of the backrest like with PediMate, but instead each fixing strap
requiring individual fixing points, also the required attachment
points of the lower fixing straps being in a different position on
the trolley to PediMate.
ACR child harness can be attached to CCT-PX by first attaching
one of these fixing tangs to each of the blue fixing straps supplied
with the ACR harness, as per below photos. The ACR blue fixing
strap is looped through and around the tang, then re-attached to
the ACR harness. This should be done for all 4 attachment straps.
7 - PREPARING TO TRANSPORT A PATIENT
Preparing to Transport a Patient
7.9 - Attachment of other 3rd party
Child harness (cont...)
Once a tang has been attached to all 4 straps, attach each of the
fixing straps onto the trolley.
The 2 upper ACR fixing straps should be attached to either set of
fixing studs located on the rear of the backrest. Either position
can be used, dependant on the size of patient and size of ACR
harness being used
The 2 lower ACR fixing straps should be attached to 2 dedicated
side-fixing points positioned at the base of the backrest
Attachment of upper ACR fixing straps to either set of
fixing studs
Attached to upper studs Attached to lower studs
on backrest on backrest