Ferno CCT-PX, Руководство пользователя

Страница: 17 / 40

FERNO/MAN/1121/226-R3/UK
17
6 - OPERATING THE TROLLEY FEATURES
Operating the Trolley
Ratcheting
Angles
5.12 Lateral-Folding Cotsides
Available as a baseline specification are the Lateral cotsides.
These are a simple folding cotside which folds parallel to the
trolley side, allowing to be folded down when moving patient
on or off the trolley, and raised a locked in place when patient
is present on the trolley. To lower the cotside, squeeze the lever
on the underside of the cotside top bar and push the cotside
downwards and towards the foot-end
5.13 - Surface eXtending (SX) Cotsides
(Option)
As an alternative option to the lateral folding cotsides, SX Surface
eXtending cotsides are also available which serve as a standard
trolley cotside, but which also ratchet to different angles to
accommodate larger patient sizes and which also ratchet to near-
horizontal, giving an extended patient surface for larger bariatric
patients with even larger physical body mass
The SX cotsides have 3 ratchet positions plus near vertical, near
horizontal and fully down, 6 positions in total.
The ratchet position angles from horizontal are 10
o
, 27.5
o
, 45
o
,
62.5
o
and 80
o
.
Keeping the release lever held, push the cotside slightly forward,
then back towards you until you reach the position required, then
move back up slightly to lock the cotside at that ratchet position.
A click will be heard when the cotside locks into place.
Whilst holding the top of cotside, grip and squeeze the red
release lever upwards.
5.14 - Lowering/Raising SX cotsides
The SX cotsides can be easily moved to the various ratchet angles
by use of the red cotside release lever, which is located in the
centre of the cotside, directly underneath the red "X" graphic.
SX cotside release lever
Squeeze the release lever
Moving the SX cotside to the required position