Page 88
VIVO Monitor
VIVO Monitor
Press Confi rm to save all parameters defi ned
The
Delete all Settings
function enables you to:
-
Delete User Settings:
when this option is selected, it deletes only the data related to the
user, such as Ring Settings, Friendship Request List, Pictures, Tags, etc.
- Restore Factory Settings:
when this option is selected, the monitor is restored to the
factory confi guration. The monitor's IP is deleted and it returns to the factory IP 10.0.0.1.
2.16.8.2 Deleting all Settings
Press Confi rm to save the option selected
Given that the delete operation is irreversible, a
warning message is displayed when the previous
screen is confi rmed to indicate the operation to be
performed and requesting confi rmation once again
for it to be carried out. This warning message is
displayed in any option selected:
- Delete User Settings
- Restore to Factory Settings
2.16.8.3 Lift Control Settings
The
Lift Control Settings
function allows for the relays that activate when the
Lift Control
icon is pressed to be programmed. Up to 3 Relays can be activated when this icon is pressed
(depends on the installation/confi guration provided by the installer). The Relay must be in
the same Block as the monitor.
For further details, see Chapter 2.15 Lift Control.
The following fi elds are required for Relay confi guration: Group, Module and Relay.
- Group: The Group is associated to the lift.
- Module: Relay module (slave).
- Relay: Relay number (physical output of the module relay).
- Note: To go back to the Start Menu, press the intui-
tive icons displayed on the monitor - such as arrows
or icons corresponding to the current screen - by
pressing the MENU button or after a period of time,
as the monitor returns to stand-by (screen off) after
30 seconds.
