Page 44
VIVO Monitor
VIVO Monitor
1.2.4 Inter-Communication: Calls between monitors
It is possible to call from one monitor to another. There are 2 types of calls:
-
Internal:
call from one monitor to another installed in the same home.
-
External:
call between homes, i.e. to another monitor in the same installation.
The monitors are identifi ed by 2 labels:
Tenant Name
and
Monitor Tag,
which are in
Home to
Home Call Settings.
These must be accessed for this type of call in order to complete/view
the data. It is also important to establish the IP address of the monitor, which identifi es it in the
LYNX network. To do this, go to
Monitor Settings.
-
Home to Home Call Settings
internal
external
-
Monitor Settings
by default:
4444
1.2.4.1 Internal Call: Call from one monitor to another installed in the same
home.
To call another room in the same home, press the
Internal Call (Monitor selection)
icon. A list will be displayed that contains all the monitors available. Select the
required monitor and the call is automatically sent.
Notes:
- All of the monitors in the same home must have:
o
The same Tenant Name, Block and Unit
o
and different Extension and Monitor Tag.
- Monitor Settings is where Block, Unit and Extension are located.
- Home to Home Call Settings is where Tenant Name and Monitor Tag are located.
- The maximum conversation time between the monitors is 300 seconds.
contacts list
To call another home in the same installation, press the
External Call (Home to
Home Call)
icon. A list will be displayed that contains all the monitors available.
Select the required monitor and the call is automatically sent.
Note: The maximum conversation time between the monitors is 300 seconds.
1.2.4.2 External Call: Call from one monitor to another monitor in the same
installation.
friendship request
The monitor can handle two groups of contacts:
- Allow All Incoming Calls.
- Only allow incoming calls from Friends List:
Calls are restricted to the
Friendship Request
through the
Contacts List.
list of
list
friendship
request
