Page 36
VIVO Monitor
VIVO Monitor
1.2.4.1 Internal call: Call from one monitor to another installed in the same home.
To call another room in the same home, press the
Internal Call (Monitor selection)
icon in the
Start Menu
of the monitor. A list will be displayed that contains all the monitors available. Select the required monitor
and the call is automatically sent.
Note: The Internal Call icon must have been previously enabled by the installer.
Press Internal Call (Monitor selection).
The monitors that can be called in that home are
displayed. The call is made automatically if it is
selected.
The call is being made from the kitchen monitor to the
dining room monitor.
The display shows that a call from the kitchen
monitor is incoming.
On accepting the call on the kitchen monitor, the
Internal Call
icon indicates that both monitors are in an
internal communication (given that there is no video).
The maximum conversation time between the monitors is 300 seconds.
kitchen
kitchen
Notes:
- If there is only one monitor in the home, the list of monitors available will be empty. The installer is
responsible for enabling or disabling this function.
- If there are several monitors in the same home, all monitors must have the same Name, Block and
Unit. The Monitor Tag must be different. The Name and the Monitor Tag are explained on the previous
page. The Block Unit and Extension must already be programmed by the installer. How to access
Monitor Settings to view/program these parameters is indicated below.
dining room
kitchen
kitchen
dining room
