Fermax PBX EA, Руководство пользователя и инструкция по установке

Страница: 2 / 50

Welcome
Congratulations on purchasing the door phone panel Fermax IP DP "VoIP Door
Phone", which is a SIP based VoIP version of "Fermax PBX DP" analog door phone
panel. This door phone can satisfy your need of communication with visitors at the
entrance to the building, to your company or at the entrance of your house. VoIP
means "Voice over Internet Protocol" - the door phone is connected to the computer
network and enables both P2P (peer to peer) connection - i.e. it calls to an IP address
of other VoIP device directly or it is registered to a SIP server, then it calls a phone
number. There can be assigned up to two 25 digit numbers including characters "* ",
" # " .
The basic module of the door phone always contains 2 pushbuttons and optionally the
first expansion, 8 pushbutton C module. The combination of Fermax New Cityline
panels enable the sets of door phone with 1 to 10 pushbuttons just by using the basic
electronics module of Fermax IP DP. You can also expand the whole system by the 8
pushbutton expansion module Fermax PBX EXP up to the limit of 64 pushbuttons. The
basic module can contain a colour camera, optionally there can be an add-on speaker
module with an amplifier Fermax PBX EA, which is used for very noisy areas. The
Fermax New Cityline panels are rich with an add ons. For example the panels offer
installations on the surface or flush mounted, they can be used both indoors and
outdoors, there can be add-on roofing used, etc.
The Fermax IP DP door phone panel is powered by 12V of the power supply, which
can also be used for powering the electrical lock of the door. The Fermax IP DP is also
PoE powered (Power over Ethernet). The features of the door phone are similar to a
hands-free telephone. Among basic features you can find the possibility of opening up
to two doors via connected electrical locks and also an easy WEB based programming.
The producer improves the SW (firmware) of the door phone panel continuously.
Fermax IP DP panel enables uploading the latest firmware version via a standard PC.
To get the latest firmware, please write to
contact@provu.co.uk
All necessary steps for this process can be found on page 30. We strongly
recommend using the latest firmware version, which brings new features and solves
various possible issues of the continuosly improving Fermax door phone panel. At
http://www.provu.co.uk/ you can also find the latest version of user and installation
guide.