Fermax PBX EA, Руководство пользователя и инструкция по установке

Страница: 18 / 50

1.4.7. Keypad module Fermax PBX KEY
The keypad module is connected via a cable Fermax PBX CC5 and a cable Fermax PBX
CC3. The connection is similar to the connection of the expansion module. The
difference is that the keypad module is always the last in the row (you cannot connect
to the keypad module any other module) and keyboard module can be connected to
the first, second or third position. CAUTION:
-
1st position means that the keyboard (cable CC5) is connected directly to the
base module.
-
2nd position means that the keyboard is connected to the first expansion module
Fermax PBX EXP (between the keyboard and the basic module is plugged an
extension module and two cables CC5).
-
3rd position means that it is connected to the second expansion module Fermax
PBX EXP (between the keyboard and the basic module are connected with 2
extension modules and 3 cables CC5).
This means that apart from the keyboard can be used 0-26 buttons with direct dial
telephone nuber (depends on the specific configuration).
Please pay attention during programming - you need to specify correctly to which
position the keypad is connected.
Dialling is realised by a sequent pushing of number pushbuttons.
When entering a password, you need to press the B (or bell)
pushbutton. To hang up, please press the pushbutton A and the
door phone panel hangs up.
1.4.8. Other modules (panels)
All other panels can be found in the offer of your local partner.Assembly of the door
phone panel
1.4.9. Surface mounting
For surface mounting we offer a compact installation box. The
installation box is mounted with screws with plugs to the wall.
On the picture you can find an installation box, size 1.