Pag 8
Free Access Code (A1)
There is a special "free access" code (initially disabled
"0000"
) that lets you trigger the
relay that activates the door release indefinitely, until the free access code is entered
again. If the code programmed is "0000", this function is disabled.
This function is especially useful when you wish to allow free access to the area to be monitored.
1
2
3
4
5
6
7
8
9
A
0
B
NOTE:
If the code length has been changed to a higher number of digits, the free access
code will have been completed with zeros at the end. If it has been changed to a lower
number, the final digits of the code will have disappeared.
Master Code (1480)
A1
New Free Access Code
("0000" disables it)
1480 A1 5251
1º
Enter the programming mode:
3º
Key in the Free Access Code:
2º
Key in option:
beep (x4)
Example:
Create a Free Access
Code: 5251
beep (x4)
beep (x4)
Relay timing (door release activation) (A2)
The relay (which triggers the door release) is initially timed to 3 seconds.
The activation time can be changed to any value between 00 and 99 seconds, or in order to
operate in bistable mode (the first valid code activates the relay and the next one deactivates
it):
1
2
3
4
5
6
7
8
9
A
0
B
Master Code (1480)
A2
1480 A2 05
1º
Enter the programming mode:
3º
Key in the new activation time or
select bistable mode:
2º
Key in option:
beep (x4)
Example:
Change relay timing to 5
seconds.
beep (x4)
beep (x4)
00: Bistable mode
01..99: (01 to 99 sec.)
Enable exit pushbutton (A4)
It is possible to equip the system with a pushbutton (P) which, installed inside the
premises, enables the door to be opened from the inside.
These buttons can de enabled or disabled, as follows:
1
2
3
4
5
6
7
8
9
A
0
B
Master Code (1480)
A4
1480 A4 1
1º
Enter the programming mode:
3º
Key in
"1"
to enable the button
Key in
"0"
to disable it:
2º
Key in option:
beep (x4)
Example:
Enable the exit pushbutton
beep (x4)
beep (x4)
1: Button enabled
0: Button disabled
Содержание MEMOKEY 97023
Страница 1: ...Pag1...
