Fermax FVI-6010, Руководство пользователя

Страница: 9 / 52

-9-
2. Programming Monitor address (When using more than one monitor):
Access to programming menu (see above) and then input code 84XX (where XX goes from 01 to
99 seconds),
finally press OK to confirm.
E.G:
For a door opening time of 8 seconds: input code 8408 and press the button OK
Access to programming menu (Figure 3) and input one of the following codes followed by OK
button.
Turn the Green Light off - 8057
Turn the Green Light on - 8052
3. Unlock Time
4. Monitor button light:
ON(1)
=
OFF(0)
=
ON ON
ON DIP
1 2 3 4 5 6
Bit state Setting Bit state Setting
1 2 3 4 5
6
ON DIP
1 2 3 4 5
6
ON DIP
When monitor is not
at the end of bus line.
When monitor is at
the end of bus line.
Bit-6 switch setting