Fermax 14701, Руководство по установке

Страница: 5 / 30

4
2 INSTALLATION
2.1 Stand placement
Before installing the MEET monitor, the corresponding installation stand must be placed on
the wall.
This stand must be screwed on covering the box or conduit where the cable or cables
connecting to the monitor (ethernet cable, power supply and accessories, if any) arrive.
Use the screws and plugs supplied with the monitor to attach the stand.
2.2 Attaching the monitor to the stand
Once the stand is in place, proceed to hang the monitor.
To do this, snap the 4 connector anchors into the corresponding slots on the back of the
monitor and push down on the monitor to attach it.
Don't forget to pre-connect the ethernet network connectors, power supply and accessories, if
applicable.