Fermax 14701, Руководство по установке

Страница: 6 / 30

5
Connection diagram
The MEET monitor is connected to the installation by means of connectors: ethernet for LAN
connection and MOLEX type connectors for other connections (power supply, RS-485 and
sensor inputs).
A bag containing the corresponding male plugs with their cables is enclosed with the monitor´s
connector.
•
LAN#1 : Ethernet connector to the building's LAN installation. PoE for WIT monitors. No
PoE for MIO monitors.
•
LAN#2:
Ethernet connector to the home’s local LAN installation. Only WIT 10” monitor.
•
+12V: 12 Vcc power input for non-PoE installations.
•
Siren / Sensors :
o
S : 12 Vdc auxiliary output synchronised with the activation of any sensor.
The maximum current is 100 mA.
o
- : GND.
o
Z1-Z7 : sensor inputs. Z8 is reserved for tamper.
•
12V +
，
-
，
485+
，
485- : Power output and RS-485 connection for the 10 Relay Module
Ref. 1616.
NOTE:
LAN#2 connection requires a DHCP server, as it is not possible to assign an IP address from
the monitor.