Fermax 14701, Руководство по установке

Страница: 7 / 30

6
2.3 Wired alarm and doorbell sensors
Wiring diagram, normally open sensor.
Wiring diagram, normally closed sensor.
Wiring diagram, normally open sensor, option 3C.
Wiring diagram, normally closed sensor, option 3C.
Wiring diagram, doorbell.
NOTE:
Option 3C consists of a monitoring system via which the monitor would detect sabotage in
the sensor loop (shorting or cutting the sensor loop).
To enable this option, connect a 2.2 Ohm resistor according to the diagram and enable the
3C function in the monitor (See section 4.3 Configuring the alarm settings).
A bag with 8 resistors is included with the monitor.
Triggering any sensor activates the S output for 2 minutes, except when configured as a
doorbell.
The Z8 sensor input is reserved for the internal tamper (monitor anti-sabotage).