Fermax 14701, Руководство по установке

Страница: 21 / 30

20
5.4 IP CAMERA
Designate the IP camera or cameras, accessible on the NETWORK, that will be available for
viewing on this monitor.
 CAMERA No.: Select the number of cameras to be designated, between 0 and 8. The form
will be adapted to the number of selected cameras.
For each camera selected, indicate:
o
Name that will appear on the monitors during the display of the camera, for
better identification
o
CCTV RELAY : Indicate if this camera will have any associated relay (between 1
and 4), which will allow activation of any additional device (door opening, etc.).
The configuration of the relay is done when programming of ACCESS PANEL 1
of the corresponding block.
o
URL: RTSP path of the selected camera.
 DOORBELL CAMERA:
If a "doorbell" has been installed on the monitor (see installation
section), this drop-down will indicate which camera (1, 2 or none) is associated with it
(it will light up when someone rings the doorbell).
NOTE:
The RTSP route generally has the following format:
rtsp://user:password@camera_IP_address
although it depends on the configuration, brand and model of the camera itself. Please refer
to the corresponding data sheet or technical information.
The CCTV RELAY function requires the installation of a 4-Relay MEET Module Ref. 1491
installed on panel nº 1 of the corresponding block. See Panel Installation Manual.