Ferm FCO-1524, Руководство пользователя

Страница: 6 / 86

Ferm
71
Det er nødvendigt at fjerne kondensvand i tanken
mindst én gang om ugen, ved at åbne aftapnings-
hanen (fig. 16) under tanken. Vær forsigtig når
trykluft er i flasken, da vand kan komme ud under
stort tryk. Anbefalet tryk maks. 1-2 Bar.
Kondensvand fra den oliesmurte
kompressor bør ikke hældes ud i
afløbe,t eller hældes ud i naturen, da
det indeholder olie.
Udskiftning/påfyldning af olie
Kompressoren er leveret med syntetisk olie "SAE
10W30". Det er anbefalet at udskifte alt
pumpesystemets olie inden for de første 100
driftstimer.
• Skrue afløbsskruen (pakningen) af på
beholderlåget, lad alt olien løbe ud og skrue
skruen på igen (fig. 17).
• Fyld olie på via det øverste hul på
beholderlåget (fig.18) indtil måleinstrumentets
indikation på pakningen (fig. 8) er nået.
Check pumpensystemets olieniveauet hver uge,
og fyld om nødvendigt. Den syntetiske olie har
den fordel at den ikke mister dens karakteristisk,
hverken om sommeren eller om vinteren.
Du bør ikke hælde brugt olie ud i
afløbet eller naturen.
Overhold venligst nedenstående tabel, ved
udskiftning af olie.
Olietype Driftstimer
Kvalitetsolie SAE 10W30 100 eller 6 måneder
Fejl
Skulle en fejl opstå, f.eks. pga. slidtage af en
enhed, kontakt venligst serviceadressen på
garantibeviset. På bagsiden af denne manual
finder du en tegning med alle dele, der kan
bestilles.
Miljø
For at undgå transportbeskadigelse leveres
maskinen i en solid emballage. Emballagen er så
vidt muligt lavet af genbrugsmateriale. Genbrug
derfor emballagen.
Defekte og/eller kasserede elektriske
eller elektroniske maskiner skal
afleveres på en genbrugsplads.
Garanti
Garantibetingelser er beskrevet på det separat
vedlagte garantibevis.
DK
06
Ferm
Risk of electric shock.
Caution: the compressor could start
automatically in case of a black-out and
subsequent reset
Wear ear protection.
Sound power level
Special safety instructions
• Warning! The compressor may only be used
in suitable rooms (with good ventilation and an
ambient temperature from +5°C to +40°C).
• It is recommended to use the compressor with
a maximum operation of 70% in one hour
under full load, to allow for proper operation of
the product over time.
• Check that the tank is fully decompressed
before connections with the tank are
unscrewed.
• It is prohibited to make holes in, or welds to,
or purposely to distort the compressed air
tank.
• Do not perform any actions on the compressor
without first having taken the plug out of the
plug socket.
• Do not aim water jets or jets of flammable
liquids at the compressor.
• Do not place flammable objects near the
compressor.
• Switch the pressure regulator to the "0"
position (OFF = uit) during dwell time.
• Never aim the air jet at persons or animals
(fig. 20).
• Do not transport the compressor with the tank
pressurised.
• N.B.: some parts of the compressor such as
the head and the feed-through pipes may
reach high temperatures. Do not touch these
parts to avoid burns (fig. 12-13).
• Transport the compressor by lifting it or by
using the special grips or handles (fig. 5-6).
• Children and animals should be kept far away
from the area of operation of the machine.
• If you use the compressor to spray paint:
a) Do not work in enclosed spaces or near
naked flames.
b) Make sure that the environment in which
you will be working has dedicated
ventilation.
c) Protect your nose and mouth with a
dedicated mask (fig. 21).
• Do not use the compressor when the electrical
cable or the plug is damaged, and instruct an
authorised Support Service to replace them
with an original part.
• When the compressor is placed on a surface
higher than the floor, it should be secured to
prevent it from falling down during operation.
• Do not put objects or your hands in the
protective covers to avoid physical damage
and damage to the compressor.
• Do not use the compressor as a blunt
instrument against persons, objects or animals
in order to prevent serious damage.
• If the compressor is no longer in use, always
take the plug out of the plug socket.
• Always make sure that compressed-air hoses
are used for compressed air and which are
characterised by a maximum pressure
adjusted to that of the compressor. Do not try
to repair the hose if it is damaged.
Electrical safety
Earthing regulations
This compressor has to be earthed while in use
in order to protect the operator against electrical
shocks. The compressor is provided with a two-
core cable plus an earth. The electrical
connection has to be made by a qualified
technician. We recommend never disassembling
the compressor and neither making any other
connections into the pressure regulator. Repairs
should be carried out by authorised Support
Services or by other qualified centres.
Never forget that the earthing core is
the green or the yellow/green wire.
Never connect this green wire to a
terminal under load.
Before replacing the plug of the feed, make sure
that the earth cable is connected. If in doubt,
please call in a qualified electrician and have the
earthing checked.
Extension cables
Long supply lines, extensions, cable reels and
similar cause voltage dips and may prevent the
motor from starting. Sluggishness makes starting
difficult at low temperatures under freezing point
(0°C). Only use an extension cable with a plug
and earth, so never use damaged or flattened
extension cables.
GB