21
ENGLISH
Original instructions
CONTENTS
1. Introduction ..........................................21
2. Technical specification .........................21
3. Features ................................................21
4. Safety instructions ................................22
5 Assembly ..............................................22
6 Use .......................................................22
7
Electronic motor control ......................23
7.1 Starting current limiting .......................23
7.2 No load speed reduction ........................23
7.3 Speed pre-selection ..............................23
7.4 Constant electronics .............................23
7.5 Electronic overload protection .............23
7.6 Temperature-dependant overload
protection .............................................23
8
Service & maintenance ........................23
8.1 Maintenance .........................................23
8.2 Cleaning ................................................24
8.3 Faults ....................................................24
8.4 Environment ..........................................24
8.5 Warranty................................................24
Spare parts list ...............................................37
EC conformity declaration ............................38
1. INTRODUCTION
Always read the instruction for elec-
trical products carefully before use. It
will help you understand your product
more easily and avoid unnecessary risks.Keep
this instruction manual in a safe place for
future use.
The machine is only intended for mixing
concrete, cement or paint. Improper use may
damage the tool.
2. TECHNICAL SPECIFICATION
Voltage ....................................... V 230
Frequency ................................. Hz 50
Power input ............................... W
1 350
No load speed ...................... r/min 0 - 760
Whisk Ø ..................................mm 120
Weight ....................................... kg 5.6
3. FEATURES
2
3
4
1
5
6
Fig. 1
1. Switch
2. Speed control wheel
3. Tool mount
4. Ventilation apertures
5. Wrench
6. Whisk
