Fenix SM2000, Руководство по эксплуатации

Страница: 41 / 65

FENIX IMVICO SM2000 OPERATION MANUAL
41/65
ESC c 5 n
[Name] Enable/disable panel button
[Format] ASCII ESC c 5 n
Hex 1B 63 35 n
Decimal 27 99 53
n
[Range] 0
≤
n
≤
255
[Description] Enables or disables the panel buttons.
When the LSB of
n is 0, the panel button is enabled.
When the LSB of n is 1, the panel button is disabled.
[Notes]
•
Only the lowest bit of n is valid.
•
When the panel button is disabled, not is usable when the printer cover is closed.
•
In this printer, the panel button is the FEED button.
[Default] n = 0
ESC d n
[Name] Print and feed n lines
[Format] ASCII ESC d n
Hex 1B 64 n
Decimal 27 100 n
[Range] 0
≤
n
≤
255
[Description] Prints the data in the print buffer and feeds n lines.
[Notes]
•
This command sets the print starting position to the beginning of the line.
•
This command does not affect the line spacing set by ESC 2 or ESC 3 .
•
The maximum paper feed amount is 1016 mm. If the paper feed amount ( n x line
spacing) of more than 1016 mm is specified, the printer feeds the paper only 1016 mm.
[Reference]
ESC 2, ESC 3
ESC p m t1 t2
[Name] Generate pulse
[Format] ASCII ESC p
m t1 t2
Hex 1B 70 m t1 t2
Decimal 27 112 m t1 t2
[Range]
m
= 0, 1, 48, 49
0
≤
t1
≤
255, 0
≤
t2
≤
255
[Description] Outputs the pulse specified by t1 and t2 to connector pin m as follows:
m Connector pin
0, 48 Drawer kick-out connector pin 2.
1, 49 Drawer kick-out connector pin 5.
[Notes]
•
The pulse ON time is [ t1 x 2 ms] and the OFF time is [ t2 x 2 ms].