Fenix SM2000, Руководство по эксплуатации, Страница: 36 / 65

FENIX IMVICO SM2000 OPERATION MANUAL
36/65
ESC SP n
[Name] Set right-side character spacing
[Format] ASCII ESC SP n
Hex 1B 20 n
Decimal 27 32 n
[Range] 0
≤
n
≤
255
[Description] Sets the character spacing for the right side of the character to [ n x horizontal or vertical
motion units].
[Notes]
•
The right-side character spacing for double-width mode is twice the normal value. When
characters are enlarged, the right-side character spacing is
n
times normal value.
•
This command is enabled only when no data exists in the print buffer.
[Default] n = 2
ESC ! n
[Name] Select print mode(s)
[Format] ASCII ESC ! n
Hex 1B 21 n
Decimal 27 33 n
[Range] 0
≤
n
≤
255
[Description] Selects print mode(s) using n as follows:
Bit OFF/ON Hex Function
OFF 00
Character font A (12 x 24).
0
ON 01 Character font B (8 x 16).
1 -- -- Undefined.
2 -- -- Undefined.
OFF 00 Emphasized mode not selected. 3
ON 08 Emphasized mode selected.
OFF 00 Double-height mode not selected. 4
ON 10 Double-height mode selected.
OFF 00 Double-width mode not selected. 5
ON 20 Double-width mode selected.
6 -- -- Undefined.
7 -- -- Undefined.
[Notes]
•
When both double-height and double-width modes are selected, quadruple size characters
are printed.
•
When some characters in a line are double or more height, all the characters on the line are
aligned at the baseline.
•
GS ! can also select character size. However, the setting of the last received command is
effective.
•
All print modes except emphasized mode is effective only for alphanumeric.
[Default] n = 0
[Reference] GS !