8
After switching on the unit for the first time, programmes 3 – 9 are factory-set (they can be
changed as well).
For programmes 1 and 2, odd and even weeks can also be set which will change automatically
according to your requirements (page 8).
Programming the BPT-SP thermostat directly
– select the
PROG
mode by pressing the
F
button and
+/- T
buttons,
confirm with the
i
button
- select the program which you want to set (P1 – P9) with the
+/-P
buttons
- the time at which the change in temperature should begin is set
using the
+/- H
button, with a minimum step of 10 minutes
- assign the required temperature to the given time, in 0.5°C steps
+/- T
- after the first time and temperature have been set, press the
i
button for confirmation
- you will move automatically to the setting of the second time and temperature in the same day
which is indicated in the last, sixth line of the display with the symbol 2
- continue like this until the last (sixth) period is set
- after pressing the
i
button you will automatically move on to the setting of the next day where
you proceed in the same way.
Info:
If you don’t want to use all of the 6 periods in a day, move on to the next day by successive
pressing of the
i
button or by using the Day button.
Copying of days in the PROG mode
This is used to speed up the programming. A programme from one day can be copied to the
next day just by pressing the Copy button.
-the day indicator has to be on the day which you need to copy into the following day
–press the Copy button, and the programme will automatically copy the programme to the
following day and the day indicator (line 1 of the display) will move to the next day
Selection of even and odd weeks in the PROG mode
If you have the programmes 1.P and 2.P set, you can assign
which of them will be active during odd or even weeks. After
this setting, the programmes will automatically alternate every
week in the
AUTO
mode (useful for shift operation).
- press the
F
button and select the PROG mode using the
+/- T
buttons, confirming with the
i
button
- select the
1.P
programme using the
+/- P
buttons
- press the
button and allocate the week in which the
programme will be active
L = odd, U = even, 1 = not allocated
- the
2.P
programme will be allocated automatically
Factory-set programmes
Programmes
3.P
to
9.P
are factory-set but they can be changed as needed, like 1.P and 2.P.
(example: the data ‘5/21’ means that the required temperature at 5 o’clock is 21ºC)