15
FORMS OF MESSAGES SENT
Info SP
Information about the status of the control unit
Teplota xx SP
(Temperature xx
SP)
Change in the required temperature (where only whole numbers are set in
the place of xx, within the range of the permitted maximum and minimum
temperatures)
Off SP
The SP elements are switched off - for the cancellation of this function, use
the Teplota xx SP (Temperature xx SP) message (if it is in the AUTO
mode, this status is valid until the next change given by the programme).
Zavolej (Call)
Return call
xx = the temperature value in ºC (always a two-digit number, for example 05)
! For the sending and reception of return messages, any type of mobile phone can be used!!
If the telephone has the option of setting the letter size (format), always use the MEDIUM size when
writing the messages (three optional sizes) or the LARGE size (two optional letter sizes).
FORMS OF RETURN MESSAGES FROM THE CONTROL UNIT
Zadana: xx.x
(Set: xx.x)
is the required temperature (set by the user)
Akt: xx.x
is the current room temperature
Zapnuto (Switched on)
Vypnuto (Switched off
heating system switched on (On)
heating system switched off (Off)
AUTO
MANU
automatic mode AUTO
manual mode MANU
Sig:x
determines the signal level in the position of the module where x are
values in the range of 0 to 5:
0… cannot be determined or no signal detected
1… the worst signal level
5… the best signal level
Baterie! (Battery!)
Signalizes a flat battery in the central unit
Nespravne zadana sms nebo
nelze identifikovat zvolene
zarizeni (Text message has
not been entered correctly or
the selected appliance cannot
be identified)
Wrongly written text message or a connection error
xx.x
= the temperature value in ºC
RETURN MESSAGES ARE SENT WITHIN 3 MINUTES!
Note:
If the min./max. temperature in the room is exceeded (the set CONST1 AND 2, see the BPT-SP
instructions manual, p. 9), a “WARNING” text message is sent automatically in the Info form.
Info:
When using a pre-paid card, it is necessary to make a paid phone call once every 3 months. This
call is carried out automatically (after 80 days between 4 p.m. and 9 p.m.) to the number which is stated in
the control unit (CONST 12) and the call will be terminated automatically after 20 seconds. You can also
carry out this function earlier, using the “
Zavolej
” (Call) text message.