Fender Super Bassman Скачать руководство пользователя страница 2

ENGLISH - PAGES . . . . . . . . . . . 6-11

ESPAÑOL - PAGINAS  . . . . . . . . 12-16

FRANÇAIS - PAGES . . . . . . . . . . 17-21

ITALIANO - PAGINE  . . . . . . . . . 22-26

DEUTSCH - SEITEN . . . . . . . . . . 27-31

PORTUGUÊS - PAGINA. . . . . . . 32-36

  

         . . . . . . . . . . . . . 37-41

I M P O R T A N T     S A F E T Y     I N S T R U C T I O N S

 

The lightning flash with arrowhead symbol within an equilateral triangle is intended to 
alert the user to the presence of uninsulated “dangerous voltage” within the product’s 
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to 
persons.

 The exclamation point within an equilateral triangle is intended to alert the user to the 
presence of important operating and maintenance (servicing) instructions in the 
literature accompanying the product.

1) 

Read these instructions. 

2) 

Keep these instructions.

3) 

Heed all warnings.

4) 

Follow all instructions.

5) 

Do not use this apparatus near water.

6) 

Clean only with dry cloth.

7) 

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) 

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.

9) 

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The 
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, 
consult an electrician for replacement of the obsolete outlet.

10) 

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and 
the point where they exit from the apparatus.

11) 

Only use attachments/accessories specified by the manufacturer.

12) 

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer 
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.

13) 

Unplug this apparatus during lightning storms or when unused for long periods of time.

14) 

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have 
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, 
or has been dropped.

15) 

To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from 
the AC receptacle.

16) 

The mains plug of the power supply cord shall remain readily operable.

17) 

WARNING

 – To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

18) 

Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such 
as vases, are placed on the equipment.

19) 

Maintain at least 6 inches (15.25 cm) of unobstructed air space behind the unit to allow for proper 
ventilation and cooling of the unit.

20) 

CAUTION

 – For rack mounted power amplifiers, keep all wiring and materials away from the sides of the 

unit and allow the unit to cool down for 2 minutes before pulling from a rack enclosure.

21) 

Amplifiers and loudspeaker systems, and ear/headphones (if equipped) are capable of producing very high 
sound pressure levels which may cause temporary or permanent hearing damage. Use care when setting 
and adjusting volume levels during use.

22) 

FCC COMPLIANCE NOTICE: This equipment has been tested and found to comply with the limits for a Class 
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, uses and 
can radiate radio frequency energy and if not used in accordance with the instructions, may cause harmful 
interference to radio communications and there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures: reorient or relocate the receiving antenna, 
increase the separation between the equipment and receiver, connect the equipment into an outlet on a 
circuit different from that of the receiver. Consult the dealer or an experienced radio/TV technician if help is 
needed with interference.  NOTE: FMIC will not be responsible for unauthorized equipment modifications 
that could violate FCC rules, and/ or void product safety certifications.

23) 

WARNING

  –  To  maintain  product  safety,  products  with  internal  or  external  (battery  pack)  batteries: 

•Batteries and/or the product in which they are installed, shall not be exposed to excessive heat such 
as sunshine, fire or the like. •There may be a danger of explosion if the battery is incorrectly connected/
replaced. Replace only with the same or equivalent type battery specified in the instructions or on the 
product.

24) 

CAUTION

 – Unplug unit and allow it to cool before touching/ replacing vacuum tubes.

25) 

WARNING

 – Provide an earthing connection before the mains plug is connected to the mains. And, when 

disconnecting the earthing connection, be sure to disconnect after pulling out the mains plug from the 
mains.

26) 

Apparatus with CLASS I construction (grounded type with a three-prong plug) must be connected to a 
MAINS socket outlet with a protective earthing connection. 

Содержание Super Bassman













































Отзывы: