To adjust the cutting angles proceed as follows:
a. slacken the knob (15),
b. turn the swivel support (9) using the handgrip,
c. stop rotation when the pointer (24) is aligned with the selected position on the graduated
scale on the base;
d. block the swivel support by tightening the knob (15),
To return to initial conditions, proceed as follows:
a. release the swivel support by slackening the knob (15),
b. turn the swivel support (9) using the handgrip;
c. stop rotation at the end of the mechanical stroke (23) and (25),
d. block the swivel support by tightening the knob (15),
3.3.
ADJUSTING THE SLIDING BLADE GUIDE POSITION (Fig. 8-9)
NOTES
Depending on the model, the machine is supplied with a front sliding blade guide (models
with 0° - 45° cuts) or with a front and rear sliding blade guide (models with 0°, 45° and
60° cuts).
DANGER - CAUTION
PERFORM ADJUSTMENT OPERATIONS WHENEVER YOU PREPARE A WORK
PHASE
a. Slacken the knob (29),
b. Slide the blade guide (25) until it is as close to the workpiece as possible.
c. Simulate the work phase to be performed to make sure that there is no interference and/
or contact between the blade guide, the workpiece and other parts of the machine.
d. Block the blade guide in position by tightening the knob (29),
3.4.
CUTTING SPEED ADJUSTMENT
(Fig. 7A - 7B)
NOTES
Adjust the cutting speed as indicated in
this manual. The device for regulating
speed depends on the specifi c machine
model.
Select the speed (from 35 to 80 m/min) using
the speed regulator (27).
3.5.
ADJUSTING THE FEED SPEED
FOR THE AUTONOMOUS CUTTING
VERSION (Fig. 10)
a. Lift the arm to its maximum height.
b. Press the catch (17) to release the selector
switch (19).
c. Position the selector on the required feed
speed (H, M, L, LL).
d. Release the catch.
29
EN
ART. ABS NG120XL
Содержание NG120XL
Страница 2: ......
