Fema TAS-1-IAC, Руководство пользователя

Страница: 14 / 16

User’s Manual Series TAS-1
FEMA ELECTRÓNICA - Page 14
The TEK option adds functions for PEAK/VALLEY memory, or
remote TARE or remote HOLD to the instruments TAS-1. These
functions are selectable and programmable from frontal keypad,
and are activated connecting two external contacts to the rear
7.4.1- AVAILABLE FUNCTIONS
Functions PEAK, VALLEY, HOLD, TARE, RESET
Terminals 2 Terminals for 2 Free Potential Contacts
1 Function for each contact
Contact1 PEAK or VALLEY or HOLD or TARE or RESET
configurable from frontal keypad
Contact2 PEAK or VALLEY or HOLD configurable from
frontal keypad
Contact12 RESET. This function is fixed and is activated
when closing both contacts at same time.
Isolation 2KV to the input signal
3K5V to the power 230Vac and 115Vac
1KV to the power 24Vdc
7.4.3- TEK CONFIGURATION
Default Configuration
When entering code «14 22» to apply a unit reset, the TEK option is
configured as follows :
STATE FUNCTION
CONTROL 1 OFF HOLD
CONTROL 2 OFF HOLD
CONTROL12 OFF
Entering the Menu
Introduce the programming code «14 23»
Message «E INP»
TEK board recognized
Configuring the external contacts
Parameter «INP_1» Contact 1
ON
Active
OFF Not Active
Parameter «FUN_T» Function assigned to Contact1
Parameter «INP_2» Contact 2
ON
Active
OFF Nor Active
Parameter «FUN_T» Function assigned to Contact2
Parameter «RES12» RESET12
Function «Reset» when connecting
contacts 1 and 2 simultaneously
ON
Active
OFF Nor Active
Exiting the Menu
Mesage «INPUT» .- confirms that the parameters have been accepted
Message «ERROR» .- informs that at least one of the values is not correct,
and the whole configuration could not be applied. Repeat the process from the
begining.
7.4.2- CONNECTIONS
Terminal 12 .- COMMON
Terminal 15 .- CONTACT1
Terminal 16 .- CONTACT2
7.4- PEAK, VALLEY, HOLD, TARE, RESET- OPTIÓN TEK
Terminal 15
Terminal 16
Terminal 12
side terminals. Each contact has assigned one function (which
can be changed) plus a third function associated to both
contacts closing at the same time, to release a RESET for
PEAK/VALLEY memory. Isolated option.
14 23
E INP
↵ ↵↵ ↵↵
INP_1
FUN_T
FUN_T
RES12
↵ ↵↵ ↵↵
1
ON
2
OFF
INP_2
↵ ↵↵
↵↵
1
ON
2
OFF
↵ ↵↵
↵↵
1
HOLD
2
MMIN
3
MMAX
4
RESET
5
TARE
↵ ↵↵
↵↵
1
ON
2
OFF
↵ ↵↵ ↵↵
1
HOLD
2
MMIN
3
MMAX
INPUT o ERROR