background image

IMPORTANT INFORMATION 

PLEASE READ THIS BEFORE OPERATING THE UNIT 

1.  To ensure the best performance, read this manual carefully. Keep it in 

a safe place for future reference. 

2.  Install this unit in a well-ventilated, cool, dry, clean place. There 

should be a space of at least 4” (10cm) above, behind and to the sides 
of the unit. Lack of ventilation can cause the unit to malfunction. 

3.  Do not place anything on top of this unit, such as other components, 

as they could damage the finish of the unit. In addition, objects placed 

on top of the unit could obstruct the heat dissipation, causing the unit 
to malfunction. 

4.  Do not expose the unit to sudden temperature changes from cold to 

hot. Do not locate the unit in a environment with high humidity (e.g. a 

room with a humidifier), as this can cause condensation inside the unit 
which may cause an electrical shock, fire, damage to the unit and/or 
personal injury. 

5.  Do not plug this unit into a wall socket until all the connections are 

completed. 

6.  When disconnecting the power lead from the wall socket, hold the 

plug. Do not pull on the power lead. 

7.  Do not use force on any of the buttons or the cables attached to the 

unit. 

8.  Do not clean this unit with chemical solvents, as this can damage the 

unit’s finish. Use only a clean, dry cloth. 

9.  Only use the power adaptor supplied with this unit. Using another 

power supply is dangerous and may cause fire and/or damage to the 
unit, and/or personal injury. The manufacturer of the unit will not be 
held responsible for any damage or injury caused in this way. 

10.  Only use in a wall socket providing the AC voltage specified. Using an 

AC voltage outside the specified range is dangerous and may cause 
fire and/or damage to the unit, and/or personal injury. The 
manufacturer of the unit will not be held responsible for any damage 
or injury caused in this way. 

11.  To prevent damage by lightning, disconnect the power lead from the 

wall socket during an electrical storm. 

12.  Take care not to drop any liquid or foreign objects into the unit. 

Содержание DD540

















Отзывы: