Page 2
KataEX
Contents and model number
Understanding the model number
The model number
provides complete information about the configuration of a KataEX system. We’ll use the model number
KATAEX2-DC-FMS-SLV
as an example.
Contents
Understanding the model number ............. 2
Components ................................................3
Configurations ............................................ 5
Assembly steps .......................................... 9
Adjustments ..............................................18
Configurations
The Configurations section shows illustrations of
the four basic monitor arm types: fixed, motion,
fixed+fixed, and fixed+motion. Varitions within
each type include the number of monitor arms
and if a slider mount is used. See the model
number explanation at the bottom of this page.
F (fixed), FS (fixed slider) and ST (stem mount)
KataEX1-F ........................................................ 5
KataEX1-ST...................................................... 5
KataEX2-F ....................................................... 5
KataEX2-FS ..................................................... 5
M (motion) and MS (motion slider)
KataEX1-M....................................................... 6
KataEX1-MS .................................................... 6
KataEX2-M ...................................................... 6
KataEX2-MS .................................................... 6
KataEX4-MS .................................................... 6
FF (fixed+fixed)
KataEX1-FF .......................................................7
KataEX2-FF ......................................................7
KataEX3-FF ......................................................7
KataEX4-FF ......................................................7
KataEX6-FF ......................................................7
FM (fixed+motion) and FMS (fixed+motion slider)
KataEX1-FM ..................................................... 8
KataEX2-FM .................................................... 8
KataEX2-FMS .................................................. 8
KataEX3-FMS .................................................. 8
KataEX4-FM .................................................... 8
KataEX4-FMS .................................................. 8
KataEX6-FMS .................................................. 8
number of monitors
accommodated
1, 2, 3, 4 or 6
2 monitor arm assemblies
color
SLV = silver
BLK = black
WHT = white
post mounting
DC = desk clamp
GM = grommet mount
DC = desk clamp mounting
KATAEX2–DC–FMS–SLV
configuration of
monitor arm assemblies
F = fixed arm
M = motion arm
S = slider mount
ST = stem mount
S = slider
M = motion
F = fixed
• Hand tighten screws only. Do not
use power tools.
• Do not position the monitors behind
the mounting location of the base.
• If the monitor arm is installed on
a desk or table with open space
behind the arms, it is recommended
to install the 180° lockout screws.
CAUTION
