Page 14
Step #8: attach VESA plate(s) to monitor(s)
• Remove each VESA plate from its VESA mount by
(1)
pushing forward the tab at the top and
(2)
lifting upward.
—
TIP:
Practice re-installing the VESA plate before attaching it to the monitor. This will make step #9 easier.
• Place the monitor face down on a flat surface. Align the VESA plate holes with the holes on the back of the monitor. Attach the VESA plate using the four VESA plate
screws provided.
— There are two sets of four holes on the VESA plates. One set has holes 3.9" (100mm) apart, the other set has holes 3" (75mm) apart. Use the set that matches the
holes on the rear of the monitor.
KataEX
Assembly
lift off VESA plate
VESA plate screw
VESA
plate
monitor
(face down)
top
3.9"
(100mm)
3"
(75mm)
2
push tab forward
1
