Page 11
Step #4: attach up to two monitor arm assemblies
• Attach the monitor arm assembly(ies) by fitting the tabs on the end of the arm stem(s) into slots on the connection
sleeve, as shown in the illustration at right.
• The tabs may fit into any two adjacent slots on the connection sleeve.
— Typically, with one monitor arm assembly, the arm stem is installed into the center two slots so that it points
forward.
— With two monitor arm assemblies, the arm stems are usually installed on opposite sides of the connection sleeve,
at a 180° angle, with two empy slots between them.
— Two arm stems may also be installed at a 135° angle (one empty slot between arm stems) or a 90° angle (no empty
slots between arm stems).
KataEX
Assembly
tabs
arm stem
slots
arm stem
one monitor arm
connection
sleeve
90°
135°
180°
two monitor arms
Step #5: secure up to two monitor arm assemblies
• Carefully cut the decorative covers to remove them from the set. Slide the covers into the unused slots on
the connection sleeve.
• Lock the monitor arm assemblies to the connection sleeve with the locking ring. Rotate the locking ring
clockwise to secure it.
decorative covers
turn locking ring
clockwise to lock
