background image

 

 

User Manual 

29 January 2018 

 

30 

FELIX  Pro 2 

www.FELIXprinters.com  

Appendix: Terms Of Service 

TO USE OR ACCESS THE PRODUCTS, LOSS OF DATA, LOSS OF BUSINESS, LOSS OF PROFITS, BUSINESS INTERRUPTION OR THE LIKE) ARISING OUT 
OF THE USE OF OR INABILITY TO USE THE PRODUCTS, EVEN IF FELIXPRINTERS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  

b) NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL 
DAMAGES REFERENCED HEREIN AND ALL DIRECT OR GENERAL DAMAGES IN CONTRACT OR ANYTHING ELSE), THE ENTIRE LIABILITY OF 
FELIXPRINTERS AND ANY OF ITS SUPPLIERS ARISING FROM OR RELATED TO THE USE OF THE PRODUCTS SHALL BE LIMITED TO THE AMOUNT 
ACTUALLY PAID BY YOU FOR THE PRODUCTS CONCERNED.  

c) Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not 
apply to you. The above limitation of liability does not affect any legal rights under the applicable national legislation. 

 

11. Export Controls 

You will comply with all applicable laws and regulations, including without limitation the Dutch Administration Act, regarding the export of technology 
with respect to the Products. 

 

12. Force Majeure 

Force majeure means circumstances that impede the fulfillment of FELIXprinters’s obligations under these Terms and Conditions

 which are not 

within FELIXprinters’s reasonable control,

 including late and/or delayed deliveries and incomplete deliveries by FELIXprinters caused by 

circumstances beyond FELIXprinters’s reasonable control. In a force majeure situation all of FELIXprinters’s obligations shal

l be suspended. Should 

the period in which FELIXprinters cannot fulfill its obligations as a result of force majeure continue for longer than ninety (90) calendar days, both 
parties shall be entitled to dissolve the purchase agreement in writing without there being an obligation to pay any compensation whatsoever 
arising out of or in connection with that dissolution. 

 

13. Privacy 

FELIXprinters will not disclose information regarding your personal details, account or transactions to any third party other than in accordance with 
the privacy policy from Dutch law.  

FELIXprinters holds the right to show your company name and logo in FELIXprinters’s promotions, only in the context of you be

ing one of 

FELIXprinters’s customers. (‘’Our customers include …[Buyer company name and logo]’’)

 

 

14. Links to Third Party Websites 

FELIXprinters is not responsible for the content of any third-party websites or services, any links contained in third-party websites or services, or any 
changes or updates to third-party websites or services. Where FELIXprinters provides links and/or access to third-party websites and/or services it is 
only as a convenience to you, and the inclusion of any link or access does not imply an endorsement by FELIXprinters of the third-party site or 
service. 

 

15. Third Party Rights 

Third parties have no rights under applicable legislation in relation to the rights of third parties to rely upon or to enforce any term of these Terms 
and Conditions but that does not affect any right or remedy of a third party which exists or is available apart from such applicable legislation. 

 

16. Survival 

Any provisions in these Terms and Conditions which by their nature extend beyond the termination or expiration of any sale or license of the 
Products will remain in effect. 

 

17. Severability 

Содержание FELIX Pro 2

































Отзывы: