User Manual
29 January 2018
13
FELIX Pro 2
www.FELIXprinters.com
Maintenance
10
Maintenance
The printer is a quite complex motion system and requires maintenance. Besides the explanation in this chapter, for
your convenience you can watch a video showing how to maintain your printer.
https://www.youtube.com/playlist?list=PLU0Emwab9bHXCHT2ZD9SXt_nP-aoWnbwD
How to maintain/exchange hot-ends
For cleaning or maintenance purposes, the hot-end can be easily removed from the FELIX Pro.
Please take the following steps.
1.
Check if there is still filament loaded in the hot-end. If there is no filament loaded, then goto step 4. If yes, from
the display unit or PC interface select the correct extruder and heat it up.
2.
Retract the filament from the hot-end.
3.
Let it cool down.
4.
Turn off the printer.
5.
Open the cover in front.
6.
Remove hot-end connector of the corresponding hot-end.
1
2
3
4
4
1.
Push hot-end 3mm
inwards
2.
Insert tweezers in
small hole
3.
Rotate tweezers and
hot-end should start
to come out
4.
Pull out hot-end
