User Manual
29 January 2018
15
FELIX Pro 2
www.FELIXprinters.com
Maintenance
10.
Then Reverse assembly of the hot-end into the extruder assembly. Do not forget to close the lid.
Ensure the hot-end wires make the bend as shown below in green
11.
Please do the following two extruder calibrations, if you wish to properly print dual head.
-
Z-height calibration
-
XY calibration
Caution: There is a potential risk of burning, as the nozzle can reach temperatures of up to 275°
TIP: Clean hot-end exterior from filament before starting a print, to prevent blobs of plastic on your printed object.
