WSB 20-180 / WSB 20-230 / WSB 25-180 X / WSB 25-230 X
37
IT
Spegnere l’elettroutensile quando la mola da
taglio diritto resta bloccato oppure quando per un
qualsiasi motivo si dovesse interrompe l’opera-
zione di taglio. Tenere in posizione senza muoversi
fino a quando la mola da taglio diritto si sarà fer-
mata completamente. Non tentare mai di estrarre
dal taglio la mola da taglio diritto fintanto che la
mola da taglio diritto si muove ancora; in caso
contrario si potrebbe sviluppare un contraccolpo.
Rilevare ed eliminare la causa del blocco.
Non avviare nuovamente l’operazione di tronca-
tura qualora la mola da taglio diritto dovesse
ancora trovarsi nel pezzo in lavorazione. Attendere
che la mola da taglio diritto raggiunga il massimo
numero di giri ed, operando con la dovuta atten-
zione, inserirla di nuovo nel taglio.
La mola da
taglio diritto può bloccarsi, sbalzare fuori
oppure sviluppare un contraccolpo quando si
avvia l’elettroutensile e la mola da taglio diritto
dovesse trovarsi ancora nel pezzo in lavora-
zione.
Per ridurre al minimo il rischio di un blocco o di un
contraccolpo, provvedere a dotare di un supporto
adatto pannelli oppure altri pezzi in lavorazione di
dimensioni maggiori.
Per via del proprio peso,
grossi pezzi in lavorazione hanno la tendenza a
piegarsi su se stessi. I montanti di supporto
devono essere applicati sotto il pezzo in lavora-
zione nelle vicinanze della linea di taglio e su
entrambi i lati della mola da taglio diritto nonché
alle due estremità del pezzo in lavorazione.
In caso di tagli dal pieno in pareti oppure in altre
parti con scarsa visibilità, avere cura di operare
con particolare prudenza.
La mola da taglio diritto
in fase di penetrazione può colpire tubazioni del
gas oppure condutture d’acqua, cavi elettrici
oppure altri tipi di oggetti che possono provo-
care contraccolpi.
Indicazioni di sicurezza specificatamente
previste per lavori di levigatura con foglio
abrasivo.
Nel corso di lavori di levigatura non utilizzare mai
fogli abrasivi troppo grandi. Per la selezione dei
fogli abrasivi attenersi alle indicazioni della casa
costruttrice.
Fogli abrasivi che sporgono dal pla-
torello comportano il rischio di incidenti, pos-
sono lacerarsi, rimanere impigliati, strapparsi dal
platorello oppure provocare un contraccolpo.
Indicazioni di sicurezza specificatamente
previste per lavori di levigatura con spazzole
metalliche.
Tenere presente che i fili metallici possono essere
scaraventati fuori dalla spazzola già in caso di
normali lavori. Non sottoporre la spazzola metal-
lica a carico troppo elevato esercitando una pres-
sione troppo alta.
I fili metallici possono
penetrare in indumenti leggeri e/o nella pelle.
Evitare assolutamente che la spazzola metallica
possa arrivare a toccare la cuffia di protezione nel
caso in cui per l’operazione di levigature con la
spazzola metallica dovesse essere previsto l’uti-
lizzo di una cuffia di protezione.
Il diametro della
spazzola metallica può allargarsi per via del
carico esercitato durante il lavoro e per via delle
forze centrifugali.
Guida rapida.
La numerazione degli elementi di
comando qui di seguito utilizzata si rife-
risce alle illustrazione che si trovano all’inizio del
presente libretto delle Istruzioni per l’uso.
1 Interruttore
Accendere e spegnere l’elettroutensile,
Interruttore di avvio/arresto (1a),
Pulsante di sicurezza (1b).
2 Levetta di fissaggio rapido
Per il serraggio dell’utensile abrasivo.
3 Unità di fissaggio
Fissaggio dell’utensile abrasivo.
3 41 01 020 06 3.book Seite 37 Dienstag, 10. Mai 2005 11:34 11