4
en
Before putting into operation, check the con-
nection and the plug for damage.
Please also observe the operating instructions
and safety warnings of the power tool being
connected to the socket outlet of the vacuum
cleaner.
Extension cord
If the use of an extension cord
is required, its length and con-
ductor cross-section must be adequate for the
applicational case, in order to prevent a volt-
age drop in the extension cord, power loss and
overheating of the power tool.
Otherwise, the
extension cord and power tool are liable to
electrical danger, and the working efficiency is
impaired.
Recommended dimensions of extension cords
at an operating voltage of 120 V – single-phase
a. c.:
Vakuumcleaner without power tool
Vakuumcleaner with power tool
Intended use of the vacuum cleaner.
Wet/dry vacuum cleaner for vacuuming and
extraction of dry, non-hazardous dusts,
minor dust particles, particularly when carry-
ing out dust-forming work with a power tool,
and non-combustible liquids, in weather-pro-
tected environments using the application
tools and accessories recommended by FEIN.
WARNING
Min. conductor size
(A.W.G.)
Conductor Size in
mm
2
16
14
12
1.5
2.5
4
Cord Length in Feet
Cord Length in Meters
≤
100 100–
200
200–
300
≤
30
30–
60
60–
100
Power con-
sumption
Min. conductor size
(A.W.G.)
Conductor Size in
mm
2
10–13
16
14
12
1.5
2.5
4
13–18
14
12
–
2.5
4
–
Cord Length in Feet
Cord Length in Meters
≤
100 100–
200
200–
300
≤
30
30–
60
60–
100
3 41 01 116 06 0.book Seite 4 Freitag, 17. Dezember 2010 12:42 12
