9
en
Mounting/dismounting the vacuum
hose (Figure 6).
Turbo I, Turbo II:
➤
Insert the vacuum hose to the stop in
the hose connection socket until tightly
seated.
➤
To remove the vacuum hose, press the
release button and pull the vacuum hose
out.
Turbo III:
➤
Insert the vacuum hose into the hose
connection socket until tightly seated.
➤
To remove the vacuum hose, hold
hose close to the vacuum body and twist
hose while pulling.
➤
Mount accessories applying only slight
pressure. For disassembling, turn the
parts somewhat against each other and
pull apart.
Working instructions.
Before mounting or replacing accessories, pull the plug.
This preventive safety
measure rules out the danger of injuries through accidental starting of the vac-
uum cleaner.
The motor of the vacuum cleaner is equipped
with a soft-start function.
The vacuum cleaner starts with the last set
suction capacity.
Switching on and off without a power
tool connected (Figure 7).
First check that the power
cord and power plug are not
damaged.
Switching ON
:
➤
Set the On/Off switch to (
II
).
Switching OFF
:
➤
Set the On/Off switch to (
O
).
Fig. 6
Hose
connection
socket
Vacuum hose
WARNING
WARNING
Fig. 7
On/Off switch
3 41 01 116 06 0.book Seite 9 Freitag, 17. Dezember 2010 12:42 12
