19
en
Turning or replacing cutting bars
(BSS1.6E) (figure 15).
Loosen the screws with the hex key.
When the front half of the cutting edges on
the cutting bars are dull, turn the cutting bars
by 180° and mount them each to the opposite
side.
When both cutting edge halves are dull,
replace the cutting bars.
Replacing cutting bars (BSS2.0E)
(figure 16).
Loosen the screws with the hex key.
Remove the cutting bars and mount new
ones.
1.
1.
3.
2.
4.
3.
2.
4.
5.
5.
Cutting bars
Screws
Fig.15
Cutting bars
Screws
1.
2.
4.
3.
5.
6.
Fig.16
OBJ_BUCH-0000000109-001.book Page 19 Friday, June 7, 2013 10:26 AM
