14
en
Clipping off the cut chip (BSS1.6CE)
(figure 8).
Clip off the chip by turning the chip-cutter
actuator (3/4 turn in clockwise direction)
while the machine is running. To continue
working, reset the chip-cutter actuator to the
starting position.
Note:
Do not continue to work with a broken
off chip brake! Replace the chip cutter.
For cut-outs, pull the power tool from the
chip while the motor is running. Cut long
chips off.
Adjusting the cutting stroke (BLS3.5)
(figure 9).
Adjust the desired clearance with the dial
control.
1.
2.
3.
4.
Chip cutter
Fig.8
Chip-cutter actuator
Material
thickness
Curved cut
Straight cut
0.5 mm
1 mm
–
1.5 mm
–
2 mm
–
2.5 mm
–
3 mm
3.5 mm
Dial control
Cutter blade
Fig.9
OBJ_BUCH-0000000109-001.book Page 14 Friday, June 7, 2013 10:26 AM