IDENTIFICATION
ID CPR60
Page 6 of 22
2.2 Available Software Tools, USB Driver and Firmware
The USB driver and the test and configuration tool “CPRStart” are available on our FEIG download area:
Username: CPR60
Password : cpr_reader
For firmware updates we are providing
the “FirmwareUpdateTool” and a external firmware xml-file.
2.3 Development Board
For demonstration and development purposes a special PCB with connectors, smart card connectors, power
supply and antenna is available on request (see
).
The ID CPR60-DevBoard offers 3 SAM sockets for ID-000 smart cards, 1 smart card connector for full size
ID 1 cards and different connectors for the USB, COM and SPI interface. The integrated antenna can be
used in combination with the CPR60 to communicate with transponders.
Different multi-pin connectors offer the possibility to measure and analyse signals on the different interfaces
and connectors.
The DevBoard will be delivered including a power supply. A suitable reader ID CPR60 must be ordered
separately.
Further information about the ID CPR60-DevBoard can be found in