IDENTIFICATION
ID CPR60
Page 11 of 22
4.2 Connector ANT
The ID CPR60 module is equipped with an connector for an external 50
-antenna.
The connection of the external antenna is possible via the U.FL connector „ANT“.
Figure 4: Connection of an external antenna
The technical description and hints for building external 50
-antennas can be taken from the application
note N20901-#d-ID-B.pdf.
NOTICE:
•
Only for use with 50
matched external antennas. The permanent usage of unmatched antennas
can damage the reader electronic.
•
The antenna output is neither permanent short circuit protected nor permanent no-load
protected.
•
The antenna cable should be no longer than 1m. The use of other cable length are possible after
consulting the manufacturer.
ANT:
(U.FL)