Feig Electronic ID ISC.MU02.02-CU, Руководство пользователя

Страница: 50 / 96

OBID i-scan
®
UHF Manual ID ISC.MU02.02
FEIG ELECTRONIC GmbH Page 50 of 96 H90701-3e-ID-B
7.13. CFG36: RF-Interface UHF
The parameters of the CFG36 configuration block contain global Transponder drivers and Reader
settings for UHF.
Byte 0 1 2 3 4 5 6
Contents
TAG-DRV
5
UHF-Power REG 0x00 0x00 0x00
Default 0x0010 0x00 0x06
Byte 7 8 9 10 11 12 13
Contents
0x00 FREQ_US 0x00
Nr Prefered
Chn
Prefered Chn
Default 0x3201 0x04 0x4A7D
TAG-DRV
1
: (Transponder.Driver.UHF.Drivers)
Defines the Transponder types that are operated by the Reader.
Byte: 0 1
Bit: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Driver 0 0 0 0 0 0 0 0 0 0 0 E 0 0 0 0
b0
⇒
Driver for the Transponder type is inactive
b1
⇒
Driver for the Transponder type is active
.E: (Transponder.Driver.UHF.EPC_Class1Gen2)
EPC class 1 Gen 2
In principle, only those Transponder drivers should be active that are used in the
actual application. Thus, the reaction time of the Reader for Transponder read- /
write-operations is reduced and the danger of a parasitic Transponder access is
minimized.
UHF-Power:
0x00: Full Power
0x01: Medium Power
0x02: Low Power
REG:
0x04 = FCC 902 MHz – 928 MHz
0x06 = EN 302208 865 MHz – 868 MHz
5
A reasonableness check is performed by writing this parameter to the Reader. If an error occurs the Read-
er answers with STATUS = [0x11].