Feig Electronic ID ISC.MU02.02-CU, Руководство пользователя

Страница: 34 / 96

OBID i-scan
®
UHF Manual ID ISC.MU02.02
FEIG ELECTRONIC GmbH Page 34 of 96 H90701-3e-ID-B
7.5. CFG11: Read Mode – Read Data
The parameters of the CFG11 configuration block contain Scan Mode settings. To enable Scan
Mode the Scan bit in the READER-MODE register of the configuration block
7.2. CFG1: Interface
and Mode must be set.
Byte 0 1 2 3 4 5 6
Contents TR-DATA-1
3
TR-DATA-2 TR-DATA-3 BANK DB-ADR 0
Default 0x21 0x00 0x00 0x00 0x0000
Byte 7 8 9 10 11 12 13
Contents DB-N D-START D-LGT
Default 0x0001 0x0004
TR-DATA-1
1 2
:
Selects the data types for read operation.
Bit: 7 6 5 4 3 2 1 0
Function Exten-
sion
0 0 ANT Byte
Order
DB
0 DB SNR
SNR: (OperatingMode.ScanMode.DataSelector.UID)
b0: no Serial Number will be stored
b1: Serial Number will be stored
DB: (OperatingMode.ScanMode.DataSelector.Data)
b0: no data block will be stored
b1: data block will be stored
Byte Order DB: (OperatingMode.ScanMode.DataSource.ByteOrderOfData)
b0: MSB first
b1: LSB first
ANT : (OperatingMode.ScanMode.DataSelector.AntennaNo)
b0: the number of the antenna will not be stored
b1: the number of the antenna (1-2) where the Transponder has been de-
tected, will be stored.
Extension :
If this flag is set TR-DATA-2 is present
3
A reasonableness check is performed by writing this parameter to the Reader. If an error occurs the Read-
er answers with STATUS = [0x11].