Feig Electronic ID CPR50.10-E, Руководство по установке

Страница: 27 / 31

Identification Installation ID CPR50.10-E
FEIG ELECTRONIC GmbH Page 27 of 31 M90701-7de-ID-B.doc
E
N
G
L
I
S
H
9.1.4. Connection of the extension I/O-Board ID CPR.I/O-B
G
N
D
V
C
C
R
x
D
T
x
D
IN
1
IN
2
1 2 3 4 5 6 7 8 9
X1
Fig. 9: ID CPR.I/O-B
The ID CPR.I/O-
B offers increased security with
the new "pairing function". In connection with
the latest firmware for ID CPR50.10-xE and ID
MAX50.10-E and activated pairing function the
ID CPR.I/O-
B accepts only commands from this
reader which was paired with it once.
The application note N31011-0e-ID-B will give
you some further hints and rules how to work
with this new ID CPRI/O-B module.
ID CPR.I/O-B ID CPR50.10-E
Pin Sign Note X3 Pin
1 GND Ground Max. 5 m
twisted paired
6 GND-D
2 VCC +5 VDC 5 VCC
3 RxD
Interface
Max. 5 m
twisted paired
4 OUT
4 TxD 3 IN
5 IN1* Digitaler Input 1
Door Contact
6 IN2* Digitaler Input 2
7 Relay NO
Door Opener
8 Relay COM
9 Relay NC
Table 3 Connection assignment of the I/O Extension Board
* The digital inputs [IN1] and [IN2] must to be connected to the internal ground, connector
[GND]. Any connection to external voltage might damage the unit!
9.1.4.1. Technical Data ID CPR.I/O-B
Dimensions (W x H x D)
43 mm x 39 mm x 13 mm
(1.69" x 1.54" x 0.51")
Weight 20 g
Protection class IP 20
Supply Voltage
+ 5 V DC
Temperature range
Operation
Storage
-20 °C bis +70 °C
-40 °C bis +85 °C
Relative air humidity 95 % (non-condensing)
Cable length to ID CPR50.10-E
max. 5 m (twisted paired wire)
CY PiDY / LiYCY (TP) 2 x 2 x 0,25 mm
Relay
1 x switch over
(contacts capacity: 24 V AC/DC 1,5 A)
Digital inputs
2 x activated against GND only (max. 1 k

)