Identification
Installation
ID CPR50.10-E
FEIG ELECTRONIC GmbH
Page 20 of 31
M90701-7de-ID-B.doc
E
N
G
L
I
S
H
7. Safety Instructions / Warning - Read before start-up!
The device may only be used for the intended purpose for which it is designed for.
The operation manual should be conveniently kept available at all times for each user.
Unauthorized changes and the use of spare parts and additional devices which have not
been sold or recommended by the manufacturer may cause fire, electric shocks or
injuries. Such unauthorized measures shall exclude any liability by the manufacturer.
The liability-prescriptions of the manufacturer in the issue valid at the time of purchase
are valid for the device. The manufacturer shall not be held legally responsible for
inaccuracies, errors, or omissions in the manual or automatically set parameters for a
device or for an incorrect application of a device.
Repairs may only be executed by the manufacturer.
Installation, operation, and maintenance procedures should only be carried out by
qualified personnel.
Use of the device and its installation must be in accordance with national legal
requirements and local electrical codes.
When working on devices the valid safety regulations must be observed.
Special advice for carriers of cardiac pacemakers:
Although this device doesn't exceed the valid limits for electromagnetic fields you
should keep a minimum distance of 25 cm between the device and your cardiac pace-
maker and not stay in an immediate proximity of the device respective the antenna for
some time.
8. Characterization ID CPR50.10-E
The ID CPR50.10-E is a member of the OBID
classic-pro
reader family and supports transponder
chips according ISO/IEC 14443 type A and type B as well as transponder chips according ISO/IEC
15693 and is able to communicate with NFC devices.
Because of its Ethernet interface according 10BASE-T / 100BASE-TX standard the ID
CPR50.10-E is well suited for integration in an existing LAN environment with CAT-5 cable infra-
structure.
Alternatively either a power over ethernet (PoE) power supply (according to IEEE802.3af) or an
external DC power supply can be used.
The ID CPR50.10-E can work in ISO-Host mode (polling) or in notification mode which reduces the
necessary data traffic with the reader to a minimum. In notification mode the host will be informed
by a notification message if a transponder was detected by the reader and can start the further
data exchange with this transponder if required.The remote I/O-board (ID CPR.I/O-B) can be con-
nected to the ID CPR50.10-E to have one relay output and 2 digital inputs.
