If the product is used for any purpose other than the intended purpose or if unauthorized modification is
made, the statutory warranty and statutory responsibility for defects as well as any liability on the part of
the manufacturer will be void.
Do not overload! Use the product only for the powers it was designed for.
The product designed for a
given purpose performs it better and safer than one that has a similar function. Therefore, always use the
correct one for a given purpose.
Please keep in mind that our products are not designed for commercial, trade or industrial use according
to their intended purpose. We accept no liability if the product is used in these or comparable conditions.
Where it is required, follow the legal guidelines and regulations to prevent possible accidents during
operation.
CAUTION!
Never use the product if it is close to people, especially children or pets. The user is liable for all damages
caused to third parties or their property.
! Keep these instructions manual and use them whenever you need more information. If you don't
understand some of these instructions, contact your dealer. If the product is lent to another person, it is
necessary to lent this instruction manual with it.
7.
TRAINING
All operating personnel must be adequately trained in the use, operation and setting and especially
familiar with prohibited activities,
8.
SAFETY INSTRUCTIONS
WARNING!
Failure to follow the warnings and instructions may result in electric shock, fire and/ or serious injury.
The use of other accessories or attachments other than those specified in the instructions for use, can
cause injury.
•
Get to know this product. Carefully read the instruction manual. Learn how to use this product, all
restrictions, and what risks could related with its use. Learn the product quickly stop and turn off the
controls.
•
Be careful at work, be concentrated on actual work, and use the common sense.
•
If the product is not in use, it should be stored in a dry and secure place out of the reach of children.
•
Never pull the plug from the socket by pulling on the cord. Keep the supply cord away from heat,
grease and sharp edges.
•
Always disconnect the product from the mains supply before repairing, when changing accessories, and
when the product is not used.
•
Make sure when plugging into a socket that the switch is in "off" position.
•
If the product is used outside, use only extension cord designed for outdoor use and marked as such.
•
Pay attention to what you are doing, be concentrated and think sensibly, do not work with the product
if you are tired, under the influence of alcohol, drugs or medication.
•
Faulty switches must be entrusted to an authorised repair service for replacement.
•
Do not use this product if the main switch does not allow it to switch on or off.
•
This product is designed in accordance with all applicable safety requirements and standards applicable
to it. All repairs should be only made by qualified person and spare parts replaced by original parts,
otherwise the user may be in serious danger.
SAFETY INSTRUCTIONS FOR WORKING WITH THE COMPRESSOR
TANK SAFETY VALVE
•
This valve is factory installed to prevent the pressure circuit, the compressor and motor from damage.
•
It is factory set at a specific limit for your particular model and adjustment and should never be
tampered with adjustment by user will automatically void warranty.
PRESSURE SWITCH
• The air pressure switch is set at the factory for optimum performance of your equipment. Never bypass
Содержание FC6LS
Страница 5: ......
